The Mersey Gateway Project

Assembly of giant form traveller machines gets underway in the Mersey estuary

February 5, 2016MerseylinkNews

Merseylink’s construction teams have started to assemble the special machines that will build the Mersey Gateway bridge deck between the three bridge pylons.

_M6P6964 edit

The giant blue form traveller machines are being put together at the north and south cofferdams in the Mersey estuary. They will act as movable concrete moulds for the bridge deck spans and work in a similar way to the Movable Scaffolding System, which is building the elevated approach viaducts.

Once built, the machines will be lifted by a hydraulic system and fixed into place at either side the bridge pylons to cast the first part of the deck. The form travellers will then separate and move to the next span position, and the process will be repeated, allowing the deck to ‘grow’ from each side of the pylon until the main bridge deck is complete.

2016-01-20 MGB Ground Progress - 071

After the third deck segment has been cast from the bridge pylon, it will then be connected to a stay cable and the upper pylon for support.

Three pairs of form travellers are being assembled; one pair for each bridge pylon. The machines are expected to start work in spring of this year.

Watch a short video clip to see how the form travellers will operate:

Halton Borough Council Mersey Link

Copyright © 2017
Mersey Gateway Project